Hyundai Santa Fe Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Currently having problems with a 2013 Santa Fe Sport. On the passenger side headlamp assembly, only the headlights work (high and low beam). The Turn signal, position lamp and side marker do not work. I removed the whole assembly and plugged it into the drivers side wire harness to see if the issue was inside the assembly. When plugged into the drivers side, everything works fine. Also removed the drivers side headlamp assembly and plugged it into the passenger side, again, only the headlights work. So obviously the issue is in the wiring. As far as I know, both headlamp assemblies share the same fuse, eliminating that as the issue. (Correct me if I'm wrong)

Does anyone have any ideas? I assume there's a bad ground somewhere.
 
1 - 1 of 1 Posts
Top