Hyundai Santa Fe Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
I was able to remove the 10mm bolt, using a 1/4' rachet with an extension but could not remove sensor from block.

I watched some You Tube videos and they say to rotate counter-clockwise to the 9'oclock position to remove.

I was only able to rotate it to the 10'oclock position and it's still there.

I check with digital multi-meter :
SENSOR--DCV=approx. 11.5v
HARNESS--Ohms= null

Help.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top