Hyundai Santa Fe Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I'm getting no flow out of the windshield washer head, so I'd like to separate the head from the hose. Unfortunately, the hose is hidden behind a panel under the hood. How do I get to it without damaging the head? Does the head pull out of the hole it's in? Please advise.
 

·
Registered
Joined
·
9 Posts
In my experience, usually it is not the hose but the nozzle it self. I would first check to see if your system is functioning by having someone push the button while you listen to the washer motor running. if it is running then most likely your nozzle are clogged. i have cleaned them with using very fine needle. Also check to see if the hose is cut by mice or squirrel if you park your car outside. In this case you will see the washer fluid dripping underneath the car. So please check all of the above first and pinpoint what is causing for washers not working.

Hope this helps.
 
1 - 2 of 2 Posts
Top